- Research article
- Open Access
- Open Peer Review
Laser-induced breakdown spectroscopy: a tool for real-time, in vitro and in vivo identification of carious teeth
© Samek et al; licensee BioMed Central Ltd. 2001
- Received: 17 October 2001
- Accepted: 19 December 2001
- Published: 19 December 2001
Laser Induced Breakdown Spectroscopy (LIBS) can be used to measure trace element concentrations in solids, liquids and gases, with spatial resolution and absolute quantifaction being feasible, down to parts-per-million concentration levels. Some applications of LIBS do not necessarily require exact, quantitative measurements. These include applications in dentistry, which are of a more "identify-and-sort" nature – e.g. identification of teeth affected by caries.
A one-fibre light delivery / collection assembly for LIBS analysis was used, which in principle lends itself for routine in vitro / in vivo applications in a dental practice. A number of evaluation algorithms for LIBS data can be used to assess the similarity of a spectrum, measured at specific sample locations, with a training set of reference spectra. Here, the description has been restricted to one pattern recognition algorithm, namely the so-called Mahalanobis Distance method.
The plasma created when the laser pulse ablates the sample (in vitro / in vivo), was spectrally analysed. We demonstrated that, using the Mahalanobis Distance pattern recognition algorithm, we could unambiguously determine the identity of an "unknown" tooth sample in real time. Based on single spectra obtained from the sample, the transition from caries-affected to healthy tooth material could be distinguished, with high spatial resolution.
The combination of LIBS and pattern recognition algorithms provides a potentially useful tool for dentists for fast material identification problems, such as for example the precise control of the laser drilling / cleaning process.
- Mahalanobis Distance
- Laser Induce Breakdown Spectroscopy
- Dental Tissue
- Laser Drilling
- Pattern Recognition Algorithm
Numerous techniques have been devised to examine dental caries; many of these have been reviewed e.g. by Murray  and Niemz . However, most promising some newly emerging technological realisations in analytical spectroscopy, including laser fluorescence (already a commercial diagnostic system KaVo DIAGNOdent is available) [3, 4], digital imaging fibre optics transillumination [4, 5], tuned-aperture computer tomography [6, 7], and digital radiography [6, 8]. The great sensitivity of some of these methods allows the detection of caries at earlier stage than conventional methods [1, 2, 9]. Unfortunately, none of these techniques can normally be used for real-time detection of demineralized enamel / dentin (accompanied with loss of calcium Ca and phosphorus P), associated with caries, directly during the application of laser drilling.
In recent years research groups particularly in Germany have shown that the use of femto-second lasers may present an alternative to classical mechanical drilling techniques to realise contactless drills in dentistry [2, 11, 12]. While intriguingly elegant, femto-second laser drilling still experiences problems with ablation efficiency [11, 12]. For example, some dentists utilise Er:YAG lasers [12, 13], which were recently approved by the US Food and Drug Administration (FDA) for use on human subjects . Er:YAG lasers have greater efficiency than other, presently available femto-second laser systems. However, drill areas treated by Er:YAG lasers occasionally contain long fissures that arise due to sudden vaporisation of the water in the tooth tissue [11, 12, 15]. This may result in rough tooth surfaces with deep cracks, up to 300 μm; their presence and extent were detected using dye penetration tests . Because of such cracks, acids can penetrate to the tooth and may be the source of new carious lesions. Although some authors reported that micro-cracks are avoidable [13, 14, 16], it is obvious that their appearance depends on the specific ablating conditions; presently a common consensus regarding the appearance of cracks does not seem to exist (see Eguro et al). On the other hand, it has been reported that changing the laser wavelength from the IR/visible to the UV may largely overcome the problem of mechanical stress, which causes said problem . Therefore, despite the current problems it is likely that in the near future, with further development of novel laser systems, the clinical application of femto-second pulsed laser drilling may emerge as a real alternative to mechanical / Er:YAG-laser dental treatment. Hence, regardless of the ultimately selected laser system, methods are required to monitor the drilling process.
Here we propose a method based on the technique of Laser Induced Breakdown Spectroscopy (LIBS), capable of monitoring the laser drilling process by monitoring and analysing the luminescent plasma – in vivo and in real time; thus precise control of ablated material can be achieved. In the dental practice, usually more healthy tissue than ultimately necessary is removed. The monitoring mainly depends on a "human" factor – the visual inspection by the dentist. The plasma, which is created during the ablation using short laser pulses, can be spectrally analysed using a one-fibre light delivery and collection system.
To use the spectroscopic analysis of laser-induced plasmas, to obtain information about the caries – state of dental tissue, was first suggested by Niemz  and Kohns . Their studies involved only the spectroscopic investigation of spectral lines of calcium (intensity and line width). However, using just a few spectral lines of a single element is known to potentially be a source of large errors in any laser analytical technique like LIBS. To our knowledge, there has been no study, except by our group , to simultaneously exploit the spectral information from more than one element, from matrix and non-matrix elements, in distinguishing between healthy and carious tissue. This novel approach constitutes part of our present investigation. The distinction between healthy and carious tissue can be very sensitive when exploiting spectral data from a pair, or even more than one pair, of suitable elements in the form of line intensity ratios combined with a pattern recognition algorithm.
Carious / healthy tooth material can be identified through the decrease of matrix elements (Ca and P) and/or the increase of non-matrix elements (typically Li, Sr, Ba, Na, Mg, Zn and C), using pattern recognition algorithms. This analysis process can be carried out with spatial resolution. Lateral precision of order of 100–200 μm, while depth profiling is accurate to less than 10 μm. Thus, in principle, the combination of LIBS and a pattern recognition algorithm gives dentists a powerful tool for precise real-time monitoring and identification of caries-affected tissue or dental restorative materials in the course of laser drilling.
As a note of caution we like to stress right from the outset that the laser used in this study, namely a Nd:YAG laser operating at its fundamental wavelength and providing pulses of nanosecond duration, is most likely not the laser of choice for actual in vivo laser drilling of teeth. Furthermore, no full clinical tests have been carried out thus far, only a single in vivo measurement was performed on a tooth of a volunteer. Therefore, the results reported here should be seen as a proof of principle, rather than the provision of a fully-developed technique immediately applicable in the dental practice.
In laser-induced breakdown spectroscopy one utilises the high power densities obtained by focusing the radiation from a pulsed laser (normally operating at a single, fixed wavelength), to generate a luminous micro plasma from the analyte (solid, liquid and gaseous samples). To a good approximation, the plasma composition is representative of the analyte's elemental composition. In the thirty years or so since its inception the potential of LIBS as an analytical tool has been realised, leading to an ever increasing list of applications, both for analysis in the laboratory and industrial environments [19, 20]. We would like to note that the ablation of dental tissue using pulsed lasers, and simultaneously monitoring the plasma emission closely mimics the principle behind the technique of LIBS .
Standard LIBS analysis systems comprise typical major component units, namely (a) the laser source; (b) the laser light delivery and plasma emission collection system; and (c) the system for spectral analysis. For the experimental study described here, i.e. the implementation of LIBS in dentistry we used a fibre-based LIBS assembly .
The laser system
The laser used for plasma generation was a standard pulsed Nd:YAG laser (Quantel Brilliant or BigSky), operating at its fundamental wavelength of 1064 nm, at 20 Hz repetition rate. Individual laser pulses had a pulse length of 4–8 ns (depending on the Q-switch timing adjustment of the laser power supply). The pulse energy was precisely controlled using a half-wave retardation plate and Glan-laser polarizer in the beam path. It was measured using a calibrated energy meter (Coherent LabMaster); typically, pulse energies in the range 10–30 mJ were utilised. We would like to note here, that near IR lasers of nanosecond pulse duration most likely will not be the lasers of choice in practical applications for dental drilling, but should be viewed as a proof-of-principle scenario.
The light delivery and collection system
As shown in the set-up, radiation from the Nd:YAG laser was focussed onto the launch end of the fibre, positioned just beyond the focal point of the lens, via a high reflectivity mirror (coated to R>99.5% at 1,064 nm) using a 250 mm focal length converging lens. This radiation was passed through a centre hole of 2 mm diameter in the light-collection mirror.
The laser light pulses exiting the far end of the fibre (distal-end) were directed onto the target material. Note that for a large fraction of our experiments no optical components were used between the fibre end and the tooth. The separation between the fibre and the target (tooth) was about D ≠ 1.5–2.0 mm. Taking into account this fibre-to-target distance and the fibre's numerical aperture (NA = 0.22), the irradiance on target is of the order I T ≠ 0.092–0.065 GW/cm2, for a launch pulse energy of E pf = 12 mJ. This value is safely above the threshold for the generation of a luminous plasma, which we determined as about I T,th ≠ 0.05 GW/cm2.
A fraction of the light emitted from the target surface was collected via the same fibre; this re-emerges at the launch end (proximal-end), with a divergence relating to the numerical aperture of the fibre. The mirror with an UV-enhanced metallic coating was used to separate this diverging light from the in-coming Nd:YAG laser pulses. This (diverging) plasma fluorescence light was re-focused onto the spectrograph fibre bundle. Note that the fibre assembly can be used to just collect the light from the plasma simply by placing the distal end close to the target, in case that the laser pulses are not delivered through the same optical fibre for the drilling of dental tissue.
For optional assistance in precise pointing of the near-IR ablation radiation onto particular areas of the tooth, light from a HeNe laser could be introduced collinearly via the Nd:YAG beam steering mirror (high transmission at 633 nm).
The system for spectral analysis
The system used for spectral analysis consisted of a standard spectrograph (ACR500, Acton Research) with a gateable, intensified photodiode array detector (IRY1024, Princeton Instruments) attached to it. The gating of the detector and the timing for spectral accumulation were controlled by a PC via a pulse delay generator (PG200, Princeton Instruments).
We would like to note that the experimental results presented here were obtained using laser pulses of a few nanosecond duration. Precise time gating of the system for plasma analysis is normally needed, to avoid the strong, broadband spectral contribution from Bremsstrahlung during the early phase of the plasma evolution  (largely due to plasma – laser radiation interaction). Exploiting the pattern recognition algorithm, described later in this paper, the time-gating of the detection system does not have to be overly critical: unwanted broadband background contributions are automatically accounted for. Thus the acquisition time can be set as high as a few milliseconds , rather than the usual microsecond intervals; only proper synchronisation to the laser pulse is required, in principle. Hence, less sophisticated delay generators / electronics and photon detectors, such as e.g. simple photomultiplier tubes / high-gain avalanche diodes could suffice in the construction of a cost-effective device to monitor light from the luminous plasma. Furthermore, we like to note that for laser pulses of picosecond or sub-picosecond duration the plasma – laser radiation interaction is much shorter, and normally Bremsstrahlung does not play a very significant role on the time scale of the spectrum used for elemental analysis. Normally, lower Bremsstrahlung backgrounds are also encountered when using UV laser radiation to generate the ablation plasma.
Each spectrum collected using a LIBS instrument is a "finger-print" of the material being analysed and the conditions under which it was collected. Most of the efforts in quantitative LIBS research have been aimed at normalising the spectrum collection conditions and procedures, so that the spectra are sufficiently reproducible for precise quantitative analysis, down to detection sensitivities of a few parts-per-million. In the monitoring process described here, this sophistication is not really required.
Provided that the relative intensity fluctuations related to the reproducibility in the measurement technique itself are smaller then the expected signal variations associated with the element distributions in the sample, the spectra allow for conclusive distinction between specific sample compositions. This is due to the fact that overall irregularities in the spectrum collection procedure can be included in the "finger-print" tolerance of the sample. Thus, an identification rate of close to 100% is possible . The limit of this hypothesis is approached when the sample groups to be identified are very similar, i.e. samples of the same matrix tend to this limit if their trace compositions do not significantly differ between individual samples. However, this does not pose a problem in the case presented here; only differentiation between carious and healthy tissue has to be achieved. This is easy to realise using the pattern recognition algorithm considered here. As a note of caution it should be added that, caries in its early stages might pose a challenge to the recognition algorithm because the difference to healthy tissue may not be very large. However, we have shown for a range of matrices with only subtle compositional differences that our method is still successful .
More commonly known as Discriminant Analysis in spectroscopy, the aim of any pattern recognition algorithm is to unambiguously determine the identity, or quality of an unknown sample in comparison to a reference database. There are two basic applications for spectroscopic discriminant analysis: (i) material purity / quality determination, and (ii) material identification / screening. In this work we have focused on the latter point, since – to emphasise this again – only unambiguous identification is an issue for monitoring the difference between healthy and carious tissue. It will become evident from the discussion further below that even recognising caries in its early stages of development should be possible in principle.
Material identification and the Mahalanobis Distance method of spectrum matching
Numerous algorithms do exist that can be used to assess the similarity of a measured spectrum with the training set. Here, the description has been restricted to the algorithm of interest, i.e. the so-called Mahalanobis Distance Method.
In order to calculate the Mahalanobis Distance (M.Dist), Principle Component Analysis (PCA) is used. PCA is a typical analytical approach, which normally forms part of any spectral data analysis software package, and thus we abstain here from providing extensive details of such analysis methods and algorithms but only provide a general procedural picture. In PCA / M.Dist analysis training sets of spectra are decomposed into a series of mathematical spectra called factors which, when added together, reconstruct the original spectrum. The contribution any factor makes to each spectrum is represented by a scaling coefficient, or score, which is calculated for all factors identified from the training set. Thus, by knowing the set of factors for the whole training set, the scores will represent the spectra as accurately as the original responses at all wavelengths .
Samples under analysis
In this study, we investigated different tooth samples with and without caries – predominantly molar and canine teeth of adults. No special sample treatment was carried out; extracted teeth were just washed out in distilled water and air-dried. One-hundred fifty-nine (159) extracted teeth with different extent of obvious caries (123 molars and 36 canine teeth of adults), which were assessed using visual examination by trained examiners, were used for the results discussed in this publication. The difficult-to-detect early caries lesions, such as in pits or fissures, which are generally non-pigmented or white spot lesions were not included in the study. This was because histopathologic analysis, for correct distinction between carious and healthy tissue in these non-evident cases, was not available at the time of study. Such an extended investigation is now in preparation, in collaboration with two dental practices and a hospital.
Most experiments were carried out in vitro. In addition, one test experiment was also conducted in vivo on a molar tooth of an adult volunteer. The latter experiment was performed at very low laser irradiance, just above the ablation threshold where the power density is not sufficient to cause noticeable damage to the tooth but nevertheless a luminous plasma is created.
The Mahalanobis Distance method for matching of LIBS spectra of tooth samples
For creating the Discriminant Analysis models a list of the training set spectra was simply entered into the PLS plus/IQ program attachment to GRAMS/32 spectral evaluation software package (Galactic Software Ltd.) and linked together with in-house written macro codes for visual (and audio) presentation of the analysis results. The program generated a Discriminant Analysis model for each sample, using the methods outlined in the previous section, against which test spectra were matched. When checking the identity of "unknown" spectra collected from a range of tooth samples, all were either identified as definite or possible matches to the healthy or diseased tissue discriminant analysis models, even if only one out of the six identifier spectral regions was used.
The major constituent of the tooth's crystalline enamel and dentine matrix structure is hydroxyapatite, Ca 10(PO 4)6(OH)2 whose absolute abundance is distinctly different for healthy dental tissue, and tissue affected by caries. For affected teeth the relative concentrations of the matrix elements Ca and P decrease severely. On the other hand, non-mineralising (non-matrix) elements, e.g. zinc, and organic materials (the occurrence of the carbon 193 nm line is indicative for these) increase strongly; see Figure 3d. A similar indicator for the effect of caries attack is the substantial increase of strontium, Sr, and barium, Ba, in relation to the matrix element Ca; see Figure 3c.
In the Discriminant Analysis models utilised here the important result is the M.Dist value. Depending on this, a pass (P) – healthy tissue, possible (?) – healthy/carious tissue or fail (F) – carious tissue – result was returned in the Limits tests, related to particular reference sample groups. Tests carried out on hundreds of spectra recorded from a multitude of different teeth showed conclusive evidence that by using the M.Dist values the spectra could be correctly categorised into the two distinct sample groups, namely sound, healthy tooth area / caries-affected tooth area.
The M.Dist value is effectively a measure of the similarity of an "unknown" spectrum to a group of training spectra. Thus the M.Dist value in Discriminant Analysis models reporting a "FAIL" result is normally high, indicating that the spectral contributions from individual elements are very different for e.g. healthy and caries-affected samples. The smaller the M.Dist values for a model giving a "FAIL" result the less elemental variations are encountered. On this basis statistical fluctuations in the spectra, caused by inevitable pulse-to-pulse intensity variations, can also be accounted for in the Prediction Module by adjusting the M.Dist PASS/FAIL limits appropriately .
As is the case in all Multivariate Quantitative Analysis approaches, careful application is required if the technique is to be applied both correctly and successfully. For example, the limits within which the M.Dist values indicate a match status of PASS, POSSIBLE or FAIL are frequently defined by default as <2, 2–3, and >3, respectively. For example, Raman spectroscopists often use values greater than these, e.g. <5, 5–15, and >15, respectively. Therefore, these limits always have to be determined prior to a practical application, such as distinguishing between healthy and caries-affected tooth material. The factors, which dictate these limits in LIBS analysis are (i) spectrum reproducibility and (ii) the sample-to-sample homogeneity. By testing the models produced with randomly collected spectra from samples of the material that they represent (carious or sound dental tissue), the range of M.Dist values, which gives a positive identification can be found. If this is not done then the model might incorrectly miss-identify materials.
In addition, by carefully adjusting the M.Dist limits, poor reproducibility can in principle be accounted for, provided there are sufficient elemental differences in the samples being sorted, such that clear changes in the spectral responses can be observed. With reference to Figure 3 indeed large differences in the spectral signature of healthy and carious-affected tissue are encountered, and we have shown that in contrast to these obvious cases, subtle differences can also be distinguished (meaning that even the detection of early caries lesions should be feasible). This will be discussed further below, also with reference to the choice of M.Dist limit values.
Finally, we like to note that multivariate analysis is rather unintuitive for the non-expert since a simple graphical representation of the statistical model can not normally be given, as is the case in univariate analysis. In univariate analysis a statistical distribution f(x) is plotted against its variable x, exhibiting a width parameter (confidence limit) ± Δx, or ±σ. In multivariate analysis, there are many variables x i , and the function would require a multidimensional plot. For a spectrum with up to a few hundreds of data points (variables) this can not be perceived. The M.Dist value may crudely be interpreted as sort of a confidence limit, similar to the σ in univariate analysis. In order to clarify this point, an example for univariate analysis is given further below. Note that in most analytical cases of well-behaved data multivariate algorithms will provide reduced errors when compared to univariate algorithms.
Application of the Mahalanobis Distance method to mapping of carious teeth
From the repeat analysis of the spectra collected from various tooth samples, it could safely be concluded that the Mahalanobis Distance algorithm had the potential of providing a superior tool for matching LIBS spectra and identifying "unknown" sound / carious materials. In this study we achieved close to 100% identification; only one single sample was misinterpreted during our test measurements.
This result is quite remarkable, since the spectra collected in this study were recorded for non-optimised settings. The distal-end of the optical fibre was just mounted at the distance of about 2 mm from the sample for in vitro applications, and for the in vivo measurements the fibre was simply held by hand while ablating the tooth.
Each spectrum was accumulated for only ten laser-induced plasma events. Fewer laser pulses per spectrum were used at times to speed up the analysis process, but this was at the expense of the spectrum reproducibility, and hence slightly reduced identification probability.
The training spectra utilised in this study were obtained from a range of tooth samples in vitro – namely from extracted tooth supplied by dentists.
As was pointed out further above, univariate analysis of the data may provide a more intuitive insight into the strength of LIBS for the identification of caries. In univariate LIBS analysis, which is the traditional analysis technique, one compares the (amplitude) change of a "trace" element with that of a "matrix" element (where significant changes in composition are encountered one may not have the distinction "trace" versus "matrix"). With reference to Figure 3a, i.e. the spectral region highlighting differences in the relative composition for Mg and Ca for healthy and carious tissue, one observes a substantial change in the line intensity ratios. In fact, for the two lines Mg(518.36 nm) and Ca(518.89 nm) the ratio changes from I Ca /I Mg = 4.95 to I Ca /I Mg = 0.90 (healthy-to-caries change). In repeat measurements for a range of healthy tooth samples, when normalising to the strongest peak (Ca), the intensity of the other line (Mg) varied by about 7%; this is typical in LIBS analysis of matrix materials which are not necessarily completely homogeneous. This statistical fluctuation filters through into the intensity ratio, yielding for the healthy tissue a value of I Ca /I Mg = 4.95 (-0.32/+0.37).
If one were to determine caries in its early stages then evidently the change would not be as dramatic as the one shown in Figure 3 for a far-advanced stage of caries, but the difference would be subtle. Assuming for the sake of argument that only a change in intensity of 5% of that in Figure 3a were encountered, a ratio I Ca /I Mg = 4.14 (-0.28/+0.33) would be obtained.
The two values are well outside their respective confidence limits, and thus can easily be distinguished. In principle, one now can set a decision threshold "healthy" / "caries-affected" tissue, according to the I Ca /I Mg ratio. The effectiveness of this approach was demonstrated by moving the ablation area gradually across the caries boundary (laser beam focussed more tightly than during the rest of this study). Only when nearly no overlap with the visually evident caries-affected area ensued did the I Ca /I Mg line ratio come close to the threshold value for "healthy" tissue (actually set to 4.3).
Thus, already with simple univariate (two-point) evaluation a reasonably precise monitoring procedure is at hand. The threshold accuracy is improved even further when applying a multivariate algorithm, as the one used in this study.
We like to stress that the assumption of a 5% change in the "healthy" I Ca /I Mg line ratio value, to reflect early caries, is somewhat arbitrary. A proper histopathologic analysis of various stages of caries would be required to ascertain the appropriate values, and hence the stage at which LIBS analysis could pick up the actual disease state.
Finally, we like to note that similar results to those shown in Figure 4 were obtained in an in vivo test measurement, albeit fewer locations on the tooth were probed. Said test was carried out using the "real-time" spectra from a carious-affected molar tooth of an adult volunteer, as mentioned further above. Again we like to emphasise that the laser intensity was kept near threshold levels for plasma generation, in order to prevent damage to the tooth.
In summary, applying the Mahalanobis Distance pattern recognition algorithm in discriminant analysis to the evaluation of LIBS spectra recorded from teeth, caries identification was straight-forward. The technique is easy to apply, and the results obtained indicate a near-100% identification rate for materials of both healthy and carious tooth sections.
If correctly applied, the combination of LIBS and discriminant analysis could provide a useful tool for in vivo / in vitro caries identification during the drilling process when a luminous plasma is created by short laser pulses. Since the generation of a (luminous) plasma is inherent to the laser ablation process, any of the actual laser sources currently used in dental treatment tests, not only the Nd:YAG laser utilised in this study, should be suitable for the implementation of the proposed technique. Positive / negative identification could be signalled e.g. by a short sound when the transition from caries to healthy tooth material is identified by the pattern recognition algorithm. This would allow the dentist to follow normal drilling routines while obtaining automatic, real-time information about the composition of the sample area and the status of ablation.
Finally, we would like to stress that our study should be seen as a proof of principle rather than a fully-developed analytical method. For this repeat measurements with actual dental laser system need to be carried out, and in particular more extensive in vivo studies are required. Furthermore, proper histopathologic analysis, for correct distinction between carious and healthy tissue in non-evident cases, has to be performed to provide absolute calibration standards.
O Samek gratefully acknowledges the financial support for this study through Grant CEZ:J22/98:262100002.
- Murray JJ: The prevention of Dental Disease. Oxford University Press, Oxford. 1990Google Scholar
- Niemz MH: Laser-tissue interactions. Springer Verlag, Berlin. 1996Google Scholar
- Takamori K, Hokari N, Okumura Y, Watanabe S: Detection of oclusal caries under sealant by use of a laser fluorescence system. J Clin Laser Med Surgery. 2001, 19: 267-271. 10.1089/10445470152612008.View ArticleGoogle Scholar
- Stookey GK, Gonzales-Cabezas C: Emerging methods of caries diagnosis. J Dent Educ. 2001, 65: 1001-1006.PubMedGoogle Scholar
- Schneiderman A, Elbaum M, Schultz T, Keem S, Greenebaum M, Driller J: Assessment of dental caries with Digital Imaging Fibre-Optics Transillumination (DIFOTI): in vitro study. Caries Res. 1997, 31: 103-110.View ArticlePubMedGoogle Scholar
- Nair MK, Tyndall DA, Ludlow JB, May K: Tuned aperture computed tomography and detection of recurrent caries. Caries Res. 1998, 32: 23-30. 10.1159/000016426.View ArticlePubMedGoogle Scholar
- Abreu M, Tyndall DA, Ludlow JB, Nortje CJ: The effect of the number of iterative restorations on tuned aperture computed tomography for approximal caries detection. Dentomaxillofac Radiol. 2001, 30: 325-329. 10.1038/sj.dmfr.4600636.View ArticlePubMedGoogle Scholar
- Wenzel A: Digital radiography and caries diagnosis. Dentomaxillofac Radiol. 1998, 27: 3-11. 10.1038/sj/dmfr/4600321.View ArticlePubMedGoogle Scholar
- Zero DT: Applications of clinical models in remineralization research. J Clin Dent. 1999, 10: 74-85.Google Scholar
- McIntyre JM, Featherstone JDB, Fu J: Studies of dental root surface caries. 2: The role of cementum in root surface caries. Australian Dent J. 2000, 45: 97-102.View ArticleGoogle Scholar
- Kruger J, Kautek W, Newesely H: Femtosecond-pulse laser ablation of dental hydroxyapatite and single-crystalline fluoroapatite. Appl. Phys. A. 1999, 69: S403-407. 10.1007/s003390051426.View ArticleGoogle Scholar
- Kohns P, Zhou P, Stormann R: Effective laser ablation of enamel and dentine without thermal side effects. J. Laser Appl. 1997, 9: 171-174.View ArticlePubMedGoogle Scholar
- Hibst R: Applications of lasers in dentistry – a survey. LaserOpto. 2000, 32: 46-52.Google Scholar
- Fried D, Zuerlein M, Featherstone JDB, Seka W, Duhn C, McCormack SM: IR laser ablation of dental enamel: mechanistic dependence on the primary absorber. Applied Surface Science. 1998, 127-129: 852-856. 10.1016/S0169-4332(97)00755-1.View ArticleGoogle Scholar
- Altshuler GB, Belikov AV, Sinelnik YA: A laser-abrasive method for the cutting of enamel and dentine. Laser Surg Med. 2001, 28: 435-444. 10.1002/lsm.1071.abs.View ArticleGoogle Scholar
- Fried D, Ragadio J, Champion A: Residual heat deposition in dental enamel during IR laser ablation at 2.79, 2.94, 9.6 and 10.6 μm. Laser Surg Med. 2001, 29: 221-229. 10.1002/lsm.1111.View ArticleGoogle Scholar
- Eguro T, Maeda T, Tanabe M, Otsuki M, Tanaka H: Adhesion of composite resins to enamel irradiated by the Er:YAG laser: application of the ultrasonic scaler on irradiated surface. Laser Surg Med. 2001, 28: 365-370. 10.1002/lsm.1063.View ArticleGoogle Scholar
- Jeffries T: Quintupled YAG probes 200-year-old teeth to uncover ancient diet details. Opto Laser Europe. 2001, 15-84Google Scholar
- Majidi V, Joseph MR: Spectroscopic Applications of Laser-Induced Plasmas. Critical Reviews in Analytical Chemistry. 1992, 23: 143-162.View ArticleGoogle Scholar
- Radziemski LJ: Review of Selected Analytical Applications of Laser Plasmas and Laser Ablation 1987–1994. Microchemical Journal. 1994, 50: 218-234. 10.1006/mchj.1994.1090.View ArticleGoogle Scholar
- Samek O, Liška M, Kaiser J, Beddows DCS, Telle HH, Kukhlevsky S: Clinical application of laser-induced breakdown spectroscopy to the analysis of teeth and dental materials. J. Clinical Laser Medicine & Surgery. 2000, 18: 281-289.Google Scholar
- Beddows DCS, Kondo H, Morris GW, Telle HH: Remote laser-induced breakdown spectroscopy using a novel single-fibre arrangement. CLEO/Europe – EQEC '98, Glasgow. 1998, 237- : Technical DigestGoogle Scholar
- Samek O, Beddows DCS, Kaiser J, Kukhlevsky S, Liška M, Telle HH, Young J: The application of laser induced breakdown spectroscopy to in situ analysis of liquid samples. Optical Engineering. 2000, 39: 2248-2262. 10.1117/1.1304855.View ArticleGoogle Scholar
- Amador-Hernandez J, Fernandez-Romero JM, Luque de Castro MD: In-depth characterization of screen-printed electrodes by laser-induced breakdown spectroscopy and pattern recognition. Surf. Interface Anal. 2001, 31: 313-320. 10.1002/sia.979.View ArticleGoogle Scholar
- Samek O, Krzyzanek V, Beddows DCS, Telle HH, Kaiser J, Liška M: Material identification using laser spectroscopy and pattern recognition algorithms. Lecture Notes in Computer Science. 2001, 2124: 443-450.View ArticleGoogle Scholar
- The pre-publication history for this paper can be accessed here:http://0-www.biomedcentral.com.brum.beds.ac.uk/1472-6831/1/1/prepub
This article is published under license to BioMed Central Ltd. This is an Open Access article: verbatim copying and redistribution of this article are permitted in all media for any purpose, provided this notice is preserved along with the article's original URL.