Skip to main content
Download PDF
  • Research article
  • Open access
  • Published:

Non-invasive evaluation of labial gingival and alveolar crest thickness in the maxillary anterior teeth region by 15-MHz B-mode ultrasonography

BMC Oral Health volume 21, Article number: 10 (2021) Cite this article

Abstract

Background

Knowledge of gingival thickness (GT) and alveolar crest thickness (ACT) is essential when performing surgical and non-surgical procedures in the maxillary anterior teeth region. This study aimed at evaluating the GT and ACT in the maxillary anterior teeth region using 15-MHz B-mode Ultrasonic (US).

Methods

A total of 300 teeth from 50 healthy participants, comprising 25 women and 25 men, aged between 18 and 35 years were analyzed. We measured labial periodontal tissue structures of maxillary anterior teeth, including GT and ACT, at 3 mm apical to the gingival margin (GT3) and the crestal level, respectively. The GT and ACT measurements were correlated.

Results

The mean labial GT3 of the maxillary central incisors, lateral incisors, and canines were 1.24 ± 0.03 mm, 1.21 ± 0.03 mm and 1.11 ± 0.03 mm, respectively. Canine GT3 was significantly thin than those in the central and lateral incisors (P < 0.05). With regards to labial ACT, we recorded 0.79 ± 0.03 mm, 0.76 ± 0.02 mm and 0.73 ± 0.02 mm for maxillary central incisors, lateral incisors and canines, respectively. There were no significant differences in ACT of maxillary anterior teeth (P > 0.05). GT3 of men was greater than that of women (P < 0.05). In addition, GT and ACT were positively correlated (r = 0.32, P < 0.01).

Conclusion

15-MHz B-mode US is an effective tool for measuring labial GT and ACT of anterior teeth. There are sex-associated differences in GT3 and the correlation between the GT3 and ACT of anterior teeth is moderately positive.

Peer Review reports

Background

In clinical practice, the proper diagnosis of labial gingiva thickness (GT) and alveolar crest thickness (ACT) of the anterior teeth is important to inform decisions regarding esthetic implant dentistry, periodontal therapies, and orthodontics [1,2,3]. Studies have documented that a good implant esthetic outcome is easily obtained with a thick rather than a thin soft and hard tissue [4, 5]. Therefore, awareness of the initial GT and ACT is vital for treatment and prognosis.

Different approaches have been used to assess gingival biotypes and the underlying alveolar bone. The GT and ACT measuring approaches can be divided into invasive and non-invasive groups. Invasive approaches include the application of periodontal probes or needles to directly measure gingival or alveolar bone thickness after local anesthesia [6,7,8,9]. Non-invasive GT measuring approaches involve visual assessment of the general appearance of the gingiva or transparency of the periodontal probe through the gingival margin [10, 11]. However, the assessment of GT by tissue inspection is unreliable [12, 13]. Consequently, Cone-beam computed tomography (CBCT) is a non-invasive method used to visualize an individual tooth or dentition in relation to surrounding skeletal tissues and to create three-dimensional images of the area to be examined [14,15,16]. A common critique of CBCT is that it cannot accurately measure soft tissue. When compared with a medical CT scan, soft tissue contrast on CBCT is poor because of lower signal-to-noise ratio caused by scattering radiation from larger projection image dimensions and lower tube current [17]. Fourie et al. found that CBCT adequately measured soft tissue thickness in the facial region but recommended a 0.3 mm voxel size for enhanced accuracy [18]. Moreover, radiation exposure and the associated cost-benefits of CBCT imaging limit its effective use.

Ultrasound (US) is a non-invasive and non-radiation loaded diagnostic tool widely used in medical imaging and dentistry [19, 20]. A-mode US has been used to measure GT in cadavers or humans [21,22,23,24]. Even though the A-mode US exhibits a degree of efficiency in GT measurement, it cannot provide an image of periodontal structures or analyze their relationships. High-frequency B-mode US can be used to measure the GT and ACT. Furthermore, it can also be used to detect periodontal tissue structures with dynamic image analysis. A recent study using cadavers revealed that 14 MHz B-mode US is as accurate as CBCT when determining the alveolar bone level and thickness [25]. In addition to measuring cadaver GT, Zimbran et al. [26] used a very high frequency (40 MHz) B-mode US to measure GT of bicuspids in the mandibular region. They found that B-mode US is a highly accurate and non-invasive technique for measuring GT. However, very high frequency B-mode US is not commonly used in clinical practice, and its popularity is limited. Therefore, we aimed at evaluating the labial GT and ACT of anterior human teeth using B mode US and a 15-MHz probe.

Methods

Sample selection

This study was approved by the Research Ethics Committee of the Shenzhen University General Hospital (SUGHME-06004). Study participants comprised of students, staff of Shenzhen University, and patients of the General Hospital’s Department of Stomatology for non-periodontal diseases. All study participants provided a written informed consent for clinical and US examination. Clinical examination involved measuring pocket depth and bleeding using a periodontal probe (Hu-Friedy, IL, Chicago, USA). Periodontally healthy adults (pocket depth ≤ 3 mm with no bleeding or attachment loss) were enrolled in the study. Participants with ≥ 1 of the following conditions were excluded: systemic diseases with oral manifestations; drug-associated changes in periodontal tissues; presence of endodontic pathology in the anterior teeth region; previous periodontal surgical procedures; mal-positioning, crowding, abnormal teeth morphology or spacing; history of orthodontic treatment; skeletal or maxillofacial abnormalities; pregnancy or lactation; oral breathing and smoking.

Clinical B-mode US examination

Fifty periodontally healthy participants comprising 25 males and 25 females were enrolled in the study. Their ages ranged from 18 to 35 years, with a mean of 25.8 ± 4.4 years. A total of 300 teeth were analyzed as follows; the anterior teeth were imaged using a 15-MHz transducer (Logiq E9, General Electric Company, Boston, MA, USA), and a probe (ML6-15) advanced from the labial side. The probe was coated with a coupling agent (Yizhi TM, Yijie, Guangzhou, China) on the labial side of the upper lip, and its frequency adjusted to 15-MHz. Image depth and gain were adjusted. The focus was adjusted to the gingival depth level. The probe was scanned on the maxillary transverse section on the lip surface to identify the maxillary anterior teeth, placed at the center of the tooth and rotated 90°. In the sagittal plane, the labial thickness of the soft and hard tissues of the teeth and periodontal tissues, including GT and ACT, was measured. Measurement was carefully done to prevent the US coupling agent from aspirating into the nostrils through the small maxillary space. All measurements were done in triplicates by an experienced sonographer.

Statistical analysis

Data were analyzed using SPSS 20.0 software (IBM Corp., Armonk, NY, USA). The GT3 and ACT of anterior teeth were calculated and presented as mean ± SD. Variations in the GT3 and ACT of anterior teeth were compared using One-way analysis of variance (ANOVA) followed by least-significant difference (LSD) post hoc test and variations in the GT3 and ACT between male and female were compared using Student’s t-test. Further comparisons were performed using the Spearman’s correlation coefficient. P ≤ 0.05 was considered to be statistically significant.

Results

We used 15-MHz B-mode US to measure the GT3 and ACT of 300 teeth and obtained high-resolution grayscale images at the desired levels (Fig. 1). The images show the periodontal tissue structures. The mean labial GT3 of the maxillary anterior teeth ranged between 1.31 ± 0.04 mm and 1.05 ± 0.04 mm, while labial ACT ranged between 0.82 ± 0.04 mm and 0.71 ± 0.03 mm (Table 1). Comparisons of male and female GT3 revealed a thinner gingiva among females. Notably, canine GT3 was thinner than central and lateral incisor GT3s (P < 0.05). In addition, there was a moderate positive correlation between GT3 and ACT (r = 0.32, P < 0.01).

Fig. 1
figure 1

A 15-MHz B-mode ultrasonographic image of periodontal structures of a maxillary incisor and anatomic schema. a A sagittal ultrasonographic image through a maxillary incisor. GT3 was measured at the 3 mm level apical to gingival margin while ACT was measured at the alveolar crest. b Schematic of morphometrical analysis of periodontal tissues in a US image. Tissues are indicated as follows; 1, enamel; 2, gingival margin; 3, cementoenamel junction; 4, gingiva; 5, cementum and 6, the crest of alveolar bone

Full size image
Table 1 Labial thickness of GT3 and ACT in maxillary anterior teeth
Full size table

Figure 2 shows the frequency distributions of labial GT3 and ACT measurements. For maxillary anterior teeth, a total of 66 teeth (22.0%) exhibited a GT3 of < 1.0 mm, 183 teeth (61.0%) exhibited a GT3 of 1.0–1.4 mm while 51 teeth (17.0%) exhibited a GT3 of 1.5–2.0 mm. No sites exhibited a GT3 of 2.0 mm or more. Furthermore, 16 teeth (5.3%) exhibited an ACT of < 0.5 mm, 221 teeth (73.7%) exhibited a thickness of 0.5–0.9 mm, 62 teeth (21.0%) exhibited a thickness of 1.0–1.4 mm while 1 tooth had an ACT of 1.5–2.0 mm. None of the teeth had an ACT of 2 mm or more.

Fig. 2
figure 2

Frequency distribution of GT3 and ACT at maxillary anterior teeth. Tables (below each graph) show the number of teeth. Legends indicate different thickness ranges (from 0.5 to 2 mm)

Full size image

Discussion

Accurate measurements of soft and hard tissue thickness is important for establishing oral therapeutic outcomes, especially in aesthetically critical areas. In this study, 15-MHz B-mode US was used to detect labial periodontal structures and measure GT as well as ACT of the maxillary anterior teeth. Compared to the females, the males had a thicker labial GT3. In addition, the labial GT3 of canines were thinner than those of the central and lateral incisors. A correlation between labial GT3 and ACT revealed a moderately positive association. These results are consistent with a recent study that reported a moderately positive relationship between buccal bone and soft tissue thickness of the maxillary premolars [27]. Our study is the first to establish the use of 15-MHz B-mode US for simultaneous measurements of GT3, ACT and in the assessment of the correlation between the two parameters in the maxillary anterior teeth. This approach is non-invasive and does not involve radiation.

The thickness of periodontal tissues in maxillary anterior regions have been frequently analyzed in critical cases. In this study, we enrolled periodontally healthy young participants. This is because advancing age may influence GT [28]. The average GT3 of maxillary anterior teeth in the study sample group was 1.05 mm (canine, female)–1.31 mm (central incisor, male) which was comparable with a previous study reporting a maxilla GT of 0.89 mm (canines)–1.28 mm (central incisor) in humans using the A-mode US method [29]. A mode US probe can only obtain the GT value. Therefore, we used a 15-MHz B-mode probe to successfully calculate GT and ACT from intuitive anatomical images. Our results showed that the average GT3 in maxillary canines was thinner than those of the central and lateral incisors. This outcome may be due to prominence of a canine root and the mucosa was thinnest over the prominence hard tissue as previously reported [30].

Assessment of ACT is important for monitoring periodontal disease activity [3, 31]. In this study, the average ACT was 0.79, 0.76 and 0.73 mm for maxillary central incisor, lateral incisor and canine, respectively, which were generally thinner than the respective 0.89, 0.90 and 0.93 mm previously reported using the CBCT method at 1 mm below the ACT [32]. The differences could be attributed to the varying techniques and selection of measurement sites.

The females exhibited significantly thinner labial GT3 in the maxillary anterior teeth compared to males. The relationship between gender and GT has not been established. Some studies have documented that gender influences GT [22, 28, 33], while others have reported there being no significant differences between males and females with regard to maxillary masticatory mucosa [9, 34]. These differences could be attributed to varying tooth positions, different measuring sites, sample sizes as well as other confounding factors that influence GT such as racial and genetic factors [7].

In the current study, we chose 3 mm apical from the gingival margin as the measurement point, which is very close to the alveolar crest. The relationship between GT3 and ACT was then explored, following calculation of a mean value for ACT per tooth. Results revealed a moderate positive correlation between GT and ACT, which was consistent with some [35, 36] and inconsistent with other [37, 38] studies. Using CBCT scans, Fu et al. [35] reported that labial GT was moderately associated with underlying bone thickness from 22 cadavers and Amid et al.[36] found that the mean bone thickness was greater in patients with thick gingiva compared to those with thin gingiva. However, La Rocca et al. [37] and Stein et al. [38], demonstrated a negative correlation between labial bone thickness and GT as measured based on CBCT methods. These contradictory results indicate the morphologic variations of the periodontal tissue as previously suggested by Maynard and Wilson [39]. It is, therefore, necessary for clinicians to evaluate these parameters before treatment in order to avoid risks and select appropriate procedures.

Conclusion

The 15-MHz B-mode US can be used to assess the labial periodontal tissue structure of anterior teeth. To the best of our knowledge, this is the first report regarding the use of 15-MHz B mode US to measure GT as well as ACT, and analyze their correlations in human anterior teeth. We found that GT3 was greater in men than in women. In addition, it was thinnest in maxillary anterior teeth canines. GT3 exhibited a moderate positive correlation with ACT. More studies are required to provide information for the appropriate assessment and predictable management of implant, periodontal and orthodontic patients in clinical practice.

Availability of data and materials

All necessary data are presented within the manuscript. All other materials and data are available upon request. For any more details regarding the data of this research please contact the corresponded author.

Abbreviations

GT:

Gingival thickness

GT3:

3 Mm apical to the gingival margin

ACT:

Alveolar crest thickness

US:

Ultrasonic

CBCT:

Cone-beam computed tomography

References

  1. Yang X, Zhou T, Zhou N, Man Y. The thickness of labial bone affects the esthetics of immediate implant placement and provisionalization in the esthetic zone. A prospective cohort study. Clin Implant Dent Relat Res. 2019;21:482–91.

    Article  Google Scholar 

  2. Procopio O, Trojan D, Frigo AC, Paolin A. Use of homologous bone for alveolar crest reconstruction in 483 patients with 5 years’ outcomes post implantation. Oral Maxillofac Surg. 2019;23:353–63.

    Article  Google Scholar 

  3. Zhang X, Li Y, Ge Z, Zhao H, Miao L, Pan Y. The dimension and morphology of alveolar bone at maxillary anterior teeth in periodontitis. A retrospective analysis-using CBCT. Int J Oral Sci. 2020;12:4–4.

    Article  Google Scholar 

  4. Fu JH, Lee A, Wang HL. Influence of tissue biotype on implant esthetics. Int J Oral Maxillofac Implants. 2011;26:499–508.

    PubMed  Google Scholar 

  5. Steigmann M, Monje A, Chan HL, Wang HL. Emergence profile design based on implant position in the esthetic zone. Int J Periodontics Restorative Dent. 2014;34:559–63.

    Article  Google Scholar 

  6. Stipetic J, Hrala Z, Celebic A. Thickness of masticatory mucosa in the human hard palate and tuberosity dependent on gender and body mass index. Coll Antropol. 2005;29:243–7.

    PubMed  Google Scholar 

  7. Wara-aswapati N, Pitiphat W, Chandrapho N, Rattanayatikul C, Karimbux N. Thickness of palatal masticatory mucosa associated with age. J Periodontol. 2001;72:1407–12.

    Article  Google Scholar 

  8. Huynh-Ba G, Pjetursson BE, Sanz M, Cecchinato D, Ferrus J, Lindhe J, Lang NP. Analysis of the socket bone wall dimensions in the upper maxilla in relation to immediate implant placement. Clin Oral Implant Res. 2010;21:37–42.

    Article  Google Scholar 

  9. Alhajj WA. Gingival phenotypes and their relation to age, gender and other risk factors. BMC Oral Health. 2020;20:87.

    Article  Google Scholar 

  10. De Rouck T, Eghbali R, Collys K, De Bruyn H, Cosyn J. The gingival biotype revisited: transparency of the periodontal probe through the gingival margin as a method to discriminate thin from thick gingiva. J Clin Periodontol. 2009;36:428–33.

    Article  Google Scholar 

  11. Kan JY, Morimoto T, Rungcharassaeng K, Roe P, Smith DH. Gingival biotype assessment in the esthetic zone: visual versus direct measurement. Int J Periodontics Restorative Dent. 2010;30:237–43.

    PubMed  Google Scholar 

  12. Eghbali A, De Rouck T, De Bruyn H, Cosyn J. The gingival biotype assessed by experienced and inexperienced clinicians. J Clin Periodontol. 2009;36:958–63.

    Article  Google Scholar 

  13. Aguilar-Duran L, Mir-Mari J, Figueiredo R, Valmaseda-Castellon E. Is measurement of the gingival biotype reliable? Agreement among different assessment methods. Med Oral Patol Oral Cir Bucal. 2020;25:e144–9.

    Article  Google Scholar 

  14. Pauwels R, Jacobs R, Singer SR, Mupparapu M. CBCT-based bone quality assessment: Are Hounsfield units applicable? Dentomaxillofac Radiol. 2015;44:20140238.

    Article  Google Scholar 

  15. Braut V, Bornstein MM, Belser U, Buser D. Thickness of the anterior maxillary facial bone wall-a retrospective radiographic study using cone beam computed tomography. Int J Periodontics Restorative Dent. 2011;31:125–31.

    PubMed  Google Scholar 

  16. Jin SH, Park JB, Kim N, Park S, Kim KJ, Kim Y, Kook YA, Ko Y. The thickness of alveolar bone at the maxillary canine and premolar teeth in normal occlusion. J Periodontal Implant Sci. 2012;42:173–8.

    Article  Google Scholar 

  17. Nasseh I, Al-Rawi W. Cone beam computed tomography. Dent Clin North Am. 2018;62:361–91.

    Article  Google Scholar 

  18. Fourie Z, Damstra J, Gerrits PO, Ren Y. Accuracy and reliability of facial soft tissue depth measurements using cone beam computer tomography. Forensic Sci Int. 2010;199:9–14.

    Article  Google Scholar 

  19. Yanikoglu F, Avci H, Celik ZC, Tagtekin D. Diagnostic performance of ICDAS II, FluoreCam and ultrasound for flat surface caries with different depths. Ultrasound Med Biol. 2020;46:1755–60.

    Article  Google Scholar 

  20. Schapher M, Goncalves M, Mantsopoulos K, Iro H, Koch M. Transoral ultrasound in the diagnosis of obstructive salivary gland pathologies. Ultrasound Med Biol. 2019;45:2338–48.

    Article  Google Scholar 

  21. Eghbali A, De Bruyn H, Cosyn J, Kerckaert I, Van Hoof T. Ultrasonic assessment of mucosal thickness around implants: validity, reproducibility, and stability of connective tissue grafts at the buccal aspect. Clin Implant Dent Relat Res. 2016;18:51–61.

    Article  Google Scholar 

  22. Tzoumpas M, Mohr B, Kurtulus-Waschulewski I, Wahl G. The use of high-frequency ultrasound in the measurement of thickness of the maxillary attached gingiva. Int J Prosthodont. 2015;28:374–82.

    Article  Google Scholar 

  23. Ganti B, Bednarz W, Komuves K, Vag J. Reproducibility of the PIROP ultrasonic biometer for gingival thickness measurements. J Esthet Restor Dent. 2019;31:263–7.

    Article  Google Scholar 

  24. Slak B, Daabous A, Bednarz W, Strumban E, Maev RG. Assessment of gingival thickness using an ultrasonic dental system prototype: a comparison to traditional methods. Ann Anat. 2015;199:98–103.

    Article  Google Scholar 

  25. Chan HL, Sinjab K, Chung MP, Chiang YC, Wang HL, Giannobile WV, Kripfgans OD. Non-invasive evaluation of facial crestal bone with ultrasonography. PLoS ONE. 2017;12:e0171237.

    Article  Google Scholar 

  26. Zimbran A, Dudea S, Dudea D. Evaluation of periodontal tissues using 40MHz ultrasonography. Preliminary report. Med Ultrason. 2013;15:6–9.

    Article  Google Scholar 

  27. Ganji KK. Noninvasive evaluation of the correlation between thickness of the buccal bone and attached gingiva of maxillary premolars. J Esthet Restor Dent. 2019;3:263–7.

    Google Scholar 

  28. Kolte R, Kolte A, Mahajan A. Assessment of gingival thickness with regards to age, gender and arch location. J Indian Soc Periodontol. 2014;18:478–81.

    Article  Google Scholar 

  29. Eger T, Muller HP, Heinecke A. Ultrasonic determination of gingival thickness. Subject variation and influence of tooth type and clinical features. J Clin Periodontol. 1996;23:839–45.

    Article  Google Scholar 

  30. Muller HP, Heinecke A, Schaller N, Eger T. Masticatory mucosa in subjects with different periodontal phenotypes. J Clin Periodontol. 2000;27:621–6.

    Article  Google Scholar 

  31. Hong CE, Lee JY, Choi J, Joo JY. Prediction of the alveolar bone level after the extraction of maxillary anterior teeth with severe periodontitis. J Periodontal Implant Sci. 2015;45:216–22.

    Article  Google Scholar 

  32. Kim Y-J, Park J-M, Kim S, Koo K-T, Seol Y-J, Lee Y-M, Rhyu I-C, Ku Y. New method of assessing the relationship between buccal bone thickness and gingival thickness. J Periodontal Implant Sci. 2016;46:372–81.

    Article  Google Scholar 

  33. Sharma S, Thakur SL, Joshi SK, Kulkarni SS. Measurement of gingival thickness using digital vernier caliper and ultrasonographic method: a comparative study. J Investig Clin Dent. 2014;5:138–43.

    Article  Google Scholar 

  34. Vandana KL, Savitha B. Thickness of gingiva in association with age, gender and dental arch location. J Clin Periodontol. 2005;32:828–30.

    Article  Google Scholar 

  35. Fu JH, Yeh CY, Chan HL, Tatarakis N, Leong DJ, Wang HL. Tissue biotype and its relation to the underlying bone morphology. J Periodontol. 2010;81:569–74.

    Article  Google Scholar 

  36. Amid R, Mirakhori M, Safi Y, Kadkhodazadeh M, Namdari M. Assessment of gingival biotype and facial hard/soft tissue dimensions in the maxillary anterior teeth region using cone beam computed tomography. Arch Oral Biol. 2017;79:1–6.

    Article  Google Scholar 

  37. La Rocca AP, Alemany AS, Levi P Jr, Juan MV, Molina JN, Weisgold AS. Anterior maxillary and mandibular biotype: relationship between gingival thickness and width with respect to underlying bone thickness. Implant Dent. 2012;21:507–15.

    Article  Google Scholar 

  38. Stein JM, Lintel-Hoping N, Hammacher C, Kasaj A, Tamm M, Hanisch O. The gingival biotype: measurement of soft and hard tissue dimensions—a radiographic morphometric study. J Clin Periodontol. 2013;40:1132–9.

    Article  Google Scholar 

  39. Maynard JG Jr, Wilson RD. Diagnosis and management of mucogingival problems in children. Dent Clin North Am. 1980;24:683–703.

    PubMed  Google Scholar 

Download references

Acknowledgements

The authors are indebted to the volunteers who participated in this study.

Funding

This study was made possible by the support of the Shenzhen Key Medical Discipline Construction Fund (SZXK0090) and Natural Science Foundation of Shenzhen University General Hospital (SUGH2018QD010). The funding was used for paying the instruments, transport the investigators to schools and for manuscript editing services. The funding body was not involved in study design, data collection, analysis and writing of the study.

Author information

Authors and Affiliations

  1. Department of Stomatology, Shenzhen University General Hospital and Shenzhen University Clinical Medical Academy, Liuxian Street, Nanshan district, Shenzhen, 518055, Guangdong, China

    Xiaofeng Liu, Ting Xia & He Meng

  2. Department of Ultrasound Diagnostics and Treatment, Shenzhen Second People’s Hospital, First Affiliated Hospital of Shenzhen University, Shenzhen, Guangdong, China

    Meng Sun

Authors
  1. Meng Sun
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Xiaofeng Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ting Xia
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. He Meng
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

MS contributed to the conception, design, ultrasonography, data analysis, and acquisition and drafted the manuscript; XFL contributed to data analysis and recruited participants; TX contributed to acquisition of Ultrasonic data; HM contributed to conception, design, analysis, interpretation, and critically revised the manuscript. All authors gave final approval and agree to be accountable for all aspects of the work. All authors read and approved the final manuscript.

Corresponding author

Correspondence to He Meng.

Ethics declarations

Ethics approval and consent to participate

This study has been performed in accordance with the declaration of Helsinki and was approved by the Research Ethics Committee of the Shenzhen University General Hospital under the reference number: SUGHME-06004. All study participants provided a written informed consent for clinical and US examination.

Consent for publication

Not applicable.

Competing interests

The authors declared no potential conflicts of interest with respect to the research, authorship and/or publication of this article.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sun, M., Liu, X., Xia, T. et al. Non-invasive evaluation of labial gingival and alveolar crest thickness in the maxillary anterior teeth region by 15-MHz B-mode ultrasonography. BMC Oral Health 21, 10 (2021). https://0-doi-org.brum.beds.ac.uk/10.1186/s12903-020-01377-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s12903-020-01377-z

Keywords

BMC Oral Health

ISSN: 1472-6831

Contact us