- Research article
- Open Access
- Open Peer Review
Efficacy of citric acid denture cleanser on the Candida albicansbiofilm formed on poly(methyl methacrylate): effects on residual biofilm and recolonization process
© Faot et al.; licensee BioMed Central Ltd. 2014
- Received: 4 April 2014
- Accepted: 20 June 2014
- Published: 23 June 2014
It is well known that the use of denture cleansers can reduce Candida albicans biofilm accumulation; however, the efficacy of citric acid denture cleansers is uncertain. In addition, the long-term efficacy of this denture cleanser is not well established, and their effect on residual biofilms is unknown. This in vitro study evaluated the efficacy of citric acid denture cleanser treatment on C. albicans biofilm recolonization on poly(methyl methacrylate) (PMMA) surface.
C. albicans biofilms were developed for 72 h on PMMA resin specimens (n = 168), which were randomly assigned to 1 of 3 cleansing treatments (CTs) overnight (8 h). CTs included purified water as a control (CTC) and two experimental groups that used either a 1:5 dilution of citric acid denture cleanser (CT5) or a 1:8 dilution of citric acid denture cleanser (CT8). Residual biofilms adhering to the specimens were collected and quantified at two time points: immediately after CTs (ICT) and after cleaning and residual biofilm recolonization (RT). Residual biofilms were analyzed by quantifying the viable cells (CFU/mL), and biofilm architecture was evaluated by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). Denture cleanser treatments and evaluation periods were considered study factors. Data were analyzed using two-way ANOVA and Tukey’s Honestly Significant Difference (HSD) test (α = 0.05).
Immediately after treatments, citric acid denture cleansing solutions (CT5 and CT8) reduced the number of viable cells as compared with the control (p < 0.01). However, after 48 h, both CT groups (CT5 and CT8) showed biofilm recolonization (p < 0.01). Residual biofilm recolonization was also detected by CLSM and SEM analysis, which revealed a higher biomass and average biofilm thickness for the CT8 group (p < 0.01).
Citric acid denture cleansers can reduce C. albicans biofilm accumulation and cell viability. However, this CT did not prevent biofilm recolonization.
- Denture hygiene
- Denture Cleansers
- Candida albicans
- Poly(methyl methacrylate)
Candida spp. is one of the main causative organisms of denture-induced stomatitis, which is primarily due to its ability to adhere and form biofilms on oral cavity tissues and denture surfaces, as well as due to its resistance to antifungal agents [1–4]. This biofilm grows extensively on acrylic resin denture material and its effective removal is a significant challenge by both chemical and mechanical methods [2–5].
Many chemical denture cleansers that contain enzymes, sodium hypochlorite, alkaline peroxide, and acid solutions are available for use with mechanical brushing to remove the residual biofilm attached to denture surfaces [5–8]. Denture cleansing solutions have antimicrobial properties, as demonstrated by many studies [7–12]; however, none of these methods seem to effectively remove the biofilm and prevent recolonization on the denture surface [6, 7].
Another type of denture cleanser contains citric acid and is available as a concentrated solution, which can be used daily (1:5 dilution) or weekly (1:8 dilution) after proper dilution (as indicated by the manufacturer). This cleanser acts as a chemotherapeutic agent that can effectively disrupt biofilms through a sequestering mechanism with calcium ions . This mechanism allows citric acid to break calcium bridges and subsequently disrupt the biofilm matrix, which may lead to anti-biofilm activity [14, 15].
Citric acid solutions were evaluated for their ability to decontaminate implant surfaces , demonstrating a reduction in the number of pathogenic species. Although citric acid solutions are also effective against Streptococcus mutans biofilms and biofilms derived from multiple species that develop on titanium surfaces , the effect of citric acid cleansers against Candida biofilms on denture surfaces has not yet been reported.
Although continuous use of citric acid cleansers for 3 months showed adverse effects with greater ion release from Co–Cr alloys [17, 18], no harmful effects have been demonstrated with denture materials in general . In contrast, other denture cleansers, mainly those containing sodium hypochlorite, could increase surface roughness, decrease hardness, and eventually change the color of acrylic resins and denture liners [19–21]. Therefore, citric acid cleansers might be suitable for removable dentures and orthodontic appliances and for removing biofilms and preventing their recolonization.
Therefore, considering the scarcity of studies examining the efficacy of citric acid cleansers for removing biofilms from denture materials, the present study evaluated the efficacy of citric acid cleansers on Candida albicans biofilm recolonization on poly(methyl methacrylate) (PMMA).
This in vitro study used a randomized, blinded design. C. albicans biofilms were developed for 72 h on PMMA resin specimens (n = 168) and then randomly assigned to 1 of 3 cleansing treatments (CTs): purified water, used as a control (CTC); 1:5 dilution of citric acid denture cleanser (CT5); or 1:8 dilution of citric acid denture cleanser (CT8). Residual biofilms adhering to specimens were collected and quantified at two different time points: immediately after cleaning treatments (ICT group) or 48 h after the cleaning, when residual biofilm recolonization (RT group) would occur. Residual biofilms were analyzed by determining the number of viable cells (CFU/mL). Biofilm architecture was evaluated by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The study factors were denture cleanser treatments and evaluation periods (ICT or RT). The response variables were the number of viable cells and the architecture of C. albicans residual biofilms. A scheme of the experimental design is illustrated in the Additional file 1.
Disc-shaped specimens (10 mm diameter, 2 mm thickness, and 219.8 mm2 area) of microwave-polymerized PMMA (Onda Cryl; Artigos Odontológicos Clássico Ltd, São Paulo, Brazil) were fabricated according to the manufacturer’s instructions. After polymerization, the discs were immersed in purified water at 37°C for 48 h for residual monomer release . The PMMA specimens were then ground with a horizontal polisher (model APL-4; Arotec, São Paulo, Brazil) and using progressively finer aluminum oxide papers (320-, 400-, and 600-grit) to standardize surface roughness at 0.34 ± 0.02 μm. Before developing the biofilm, the discs were ultrasonically cleaned (Thornton T 740; Thornton-Inpec Eletrônica Ltda, Vinhedo, Brazil) with 70% alcohol and sterilized ultra-purified water (20 min) to remove contaminants and artifacts from the surface . The absence of contamination was confirmed by immersing a sample of the specimens in sterile culture media.
The specimens were randomly assigned to 1 of the 3 treatment groups, which were further divided within the evaluated time points: immediately after treatments (ICT) and 48 h after cleaning and residual biofilm recolonization (RT). The number of specimens in each group (n = 12) was determined with preliminary tests, which confirmed the sample size yielded an adequate power (80%) for detecting statistically significant differences.
Salivary pellicle formation on specimens
Before developing the biofilm assays, clean PMMA specimens were coated with saliva to mimic the oral cavity environment. Human whole saliva was donated by a healthy volunteer, who provided written informed consent. The Research and Ethics Committee of Piracicaba Dental School, State University of Campinas, approved this study. The saliva sample was collected at the same time of day, for each experiment, and the collection volume was limited to 50 mL per collection period.
Human whole saliva was collected by masticatory stimulation with flexible film (Parafilm M; American Can Co, Neenah, WI). Saliva was clarified by centrifugation at 3,800 g for 10 min at 4°C. The supernatant was collected and sterilized by filtration (22 μm) for immediate use. For each disc, a salivary pellicle was formed on the surface after incubation for 30 min, at 37°C and 75 rpm, in an orbital shaker.
Inoculum and growth conditions
A loopful of yeast culture of C. albicans (ATCC 90028) was reactivated and incubated for 24 h at 37°C. Afterwards, cells were harvested, suspended in Yeast Nitrogen Base (YNB) broth (Becton Dickinson, Franklin Lakes, NJ) supplemented with 100 mM glucose. Cell density was spectrophotometrically (Spectronic 20; Bausch & Lomb, Rochester, NY) standardized to a 0.25 optical density at 520 ηm, which corresponded to 1 × 106 CFU/mL inoculum .
PMMA saliva-coated discs were placed vertically in polystyrene 24-well culture plates. Subsequently, 2 mL of the standardized cell suspension (1 × 106 CFU/mL of C. albicans in YNB supplemented with glucose 100 mM) was added to each well. Biofilm was developed at 37°C, and under 75 rpm in an orbital shaker, for 72 h, to allow biofilm maturation. The medium was changed every 24 h. Biofilm assays were performed in triplicate in 3 independent experiments.
After the biofilm growth for 72 h, the specimens were randomly assigned to 1 of 3 CTs overnight (8 h). Citric acid cleanser (CURADEN BDC 105, Curaprox, Swiss) was diluted in purified water, according to the manufacturer’s instructions, in 1:5 or 1:8 solutions, which are recommended for weekly or daily use, respectively. Each specimen was placed in a sterile beaker containing 8 mL of the treatment solution.
Following cleanser treatments (8 h), specimens were removed and washed twice in 2 mL of sterilized phosphate-buffered saline (PBS) solution (pH 7.4). The residual biofilms adhering to the specimens were immediately collected (ICT) or allowed to grow under the same conditions for 48 h (RT group) .
Viable cell quantification from residual biofilm
Residual biofilms were disrupted and adhered microorganisms were removed from specimens by sonication (7 W for 30 s). Sonicated solutions were serially diluted in PBS and plated (20 μL) in triplicate on Sabouraud Dextrose agar. The plates were incubated at 37°C under aerobic conditions for 48 h. CFU were counted using a stereomicroscope, and the results are expressed in colony-forming units per mL (CFU/mL).
Biofilm architecture analysis: SEM
Specimens with attached biofilms were rinsed with sterile PBS and placed in 1% osmium tetroxide for 1 h. Specimens were subsequently washed in purified water, dehydrated in a series of ethanol washes (70% for 10 min, 95% for 10 min, and 100% for 20 min) and air-dried in a desiccator before sputter coating with gold [24, 25]. Next, specimens were mounted on aluminum stubs and coated with gold. The biofilm surface features were visualized with SEM (JSM 5600LV, JEOL, Tokyo, Japan) at 1,500× in a high-vacuum mode at 15 kV.
Biofilm architecture analysis: CLSM
Biofilms formed on PMMA surfaces were stained using the Live/Dead BacLight Viability kit, comprising SYTO-9 and propidium iodide (PI). Before the CLSM examinations, specimens were protected from light and incubated at 37°C for 20 min [24, 25]. Images of stained biofilms were captured using a CLSM system (LEICA – TCS SP5, Leica Microsystems, Wetzlar, Germany). A series of images were obtained at 1-μm intervals in the z section for a three-dimensional view of the biofilm. At least, five representative optical fields were examined for each specimen.
COMSTAT software was used to analyze CLSM images. The architecture properties of biofilms analyzed by COMSTAT included the biovolume (μm3/μm2), average thickness (μm), and roughness coefficient.
Data were analyzed using statistical software (SAS v. 9.0; SAS Institute, Inc, Cary, NC) with a significance level fixed at 5%. The assumptions of equality of variances and normal distribution of errors were evaluated for each variable. When normality was violated, the data were logarithmically transformed. Factors interfering in the response variables (C. albicans viable cells, CFU/mL), bio-volume (μm3/μm2), average thickness (μm) and roughness coefficient) were analyzed with two-way ANOVA (type and evaluation period). Post-hoc comparisons were performed using Tukey’s Honestly Significant Difference (HSD) test.
The two-way ANOVA comparisons showed that both study factors “treatments” (CTC, CT5, and CT8) and “evaluation periods” (ICT and RT) affected the viable cell quantification (p < 0.01); but no statistical interactions were detected. However, for biofilm architecture parameters (bio-volume, average thickness, and roughness), the two-way ANOVA comparisons showed a statistical significant interaction (p < 0.001) between the factors under study.
C. albicans viable cell quantification (average ± SD) according to different treatments and evaluation period
Viable Cell Counts (106 CFU/mL)
Immediately after treatments (ICT)
Allowed to recolonize (RT)
CTC - H2O
1.01 ± 8.59Aa
11.1 ± 12.30Ba
CT5 - 1:5
1.92 ± 3.64Bb
CT8 - 1:8
3.63 ± 4.12Bb
Bio-volume (μm 3 /μm 2 ), average thickness (μm), and roughness coefficient (average ± SD) of C. albicans biofilms according to different treatments and evaluation period
10.77 ± 1.5Aa
1.30 ± 1.2Ba
12.25 ± 2.1Aa
1.53 ± 1.4Ba
0.11 ± 0.1Aa
1.41 ± 0.4Ba
12.61 ± 3.1Aa
1.14 ± 0.6Ba
11.97 ± 3.1Aa
1.04 ± 0.6Ba
0.21 ± 0.2Aa
1.73 ± 0.1Ba
3.87 ± 2.8Ab
9.71 ± 2.7Bb
4.88 ± 3.7Ab
11.69 ± 3.3Bb
1.17 ± 0.3Ab
0.30 ± 0.2Bb
In the present study, we evaluated the efficacy of citric acid denture cleanser for removing or killing the C. albicans biofilm formed on the surface of PMMA specimens. A long-term effect of other denture cleansing solutions was demonstrated in previous studies [7, 9], which also included evaluation of the gold standard solution (sodium hypochlorite). In the present study, only purified water was used as the control. Considering that it is well known that sodium hypochlorite is effective against Candida biofilms, our study aimed to show differences, if any, between citric acid denture cleanser and the absence of chemical treatment. The present study showed that the citric acid treatment was more effective than the absence of treatment; however comparisons with a gold standard solution remain to be tested.
The citric acid denture cleanser used in the present study was a blend of ultra-purified water and citric acid in non-toxic, water soluble, low-viscosity chemical solution, which can break calcium-ion bridges that serve as chemical binding sites connecting the EPS polymeric chains . Based on the literature, citric acid is the chemotherapeutic agent with the highest potential for removing biofilms from contaminated titanium surfaces in vitro, although it did not achieve complete removal [14, 16].
In the present study, we observed a biofilm recolonization phenomenon in both experimental groups when cleaned specimens were maintained for 48 h more in a culture medium supplemented with glucose. Therefore, we found that citric acid disrupted the biofilms but did not totally remove them. This finding leads to the supposition that this denture cleanser can be an effective complementary method for biofilm removal once it allows the debris to be more easily removed from the denture surface. Thus, it is expected that citric acid presents a more consistent effect on biofilm removal when associated with a mechanical method, such as brushing, to completely remove the mature biofilm from dentures [14, 16, 26].
Although the number of viable cells was null immediately after treatments with either citric acid cleansers, it should be noted that the number of viable cells identified by CFU assay has low sensibility when a small number of cells are viable. In an attempt to explain these results, we used CLSM as an auxiliary method for CFU assay by analyzing the biofilms with their three-dimensional structures preserved, which also showed viability. Therefore, the presence of residual biofilm was confirmed by SEM and CLSM analysis, and it was possible to observe reminiscent viable cells and biofilm structures in ICT. These residual biofilms contributed to surface recolonization after 48 h, as was observed in RT.
The present study evaluated the 1:5 and 1:8 dilutions of citric acid cleanser to simulate its weekly and daily use. These solutions probably did not completely affect the basal layers of the biofilms. This phenomenon may be due to the presence of an extracellular matrix, which protected the biofilm from the cleanser, and the reminiscent cells in metabolic quiescence, which accounted for the recolonization after 48 h [1, 27]. Therefore, a single exposition to citric acid denture cleanser is not able to remove Candida biofilms, or prevent their recolonization.
Comparing the results from viable cell quantification and biofilm architecture analysis, we found that treatments with 1:5 and 1:8 dilutions of the citric acid solutions might have a delayed effect on the biofilm cells. Although many viable cells were seen in the CLSM images, these were not detected by viable cell assessment. This can be explained by the phenomenon known as Post-Antifungal Effect (PAFE), in which substances stored inside vacuoles might kill the cells over time .
According to PAFE, citric acid uptake by Candida cells during the treatments contributed to the absence of CFUs in the viable cell assessment, as well as the reduction in cell density for the 1:5 and 1:8 groups, as compared with the control. With regard to the biofilms visualized in RT, a higher biomass was observed for the CT8 group than for the CT5 group. This difference may be related to differences in the damage provoked by the two cleansers in RT, meaning that CT8 treatment allowed higher biofilm recolonization at the RT evaluation period.
According the PAFE and the results obtained with the CLSM images, biofilms treated in the 1:5 group showed greater damage than those in the 1:8 group. Basal layers from the biofilms treated with the 1:5 dilution seemed to show a greater response at ICT. This is because the 1.5 dilution treatment resulted in a lower biofilm bio-volume and average thickness at RT. Furthermore, the 1:8 dilution treatment did not deeply affect biofilms, allowing their extensively recolonization after 48 h.
The results of the present study demonstrate that citric acid denture cleanser is effective in reducing C. albicans cell viability in a mature biofilm, immediately after treatments. However, this cleansing solution does not completely remove the biofilm and does not prevent its recolonization after 48 h. Therefore, this study presents important findings regarding the anti-biofilm effect of citric acid denture cleanser.
The results of the present study should be interpreted with care because of the in vitro nature of the 72 h formed biofilm does not fully match the environment of the oral cavity. Also, during the initial 72 hours of initial biofilm formation, used to simulate a mature biofilm, there would be several microbial successions through time, which could be somewhat a limitation of the present study. However, the results provide important data on how the C. albicans biofilm behaves with daily and weekly treatments with citric acid denture cleanser used in clinical practice. Additional studies are needed with other Candida species in a single or mixed biofilm, which are increasingly implicated in long-term denture stomatitis. Also, these biofilms should be used for comparisons between the long-term efficacy of such treatments with citric acid and a gold standard solution (sodium hypochlorite), which would benefit the clinical treatment approaches.
Within the limitations of this study, we found that citric acid denture cleansers reduced cell viability but did not prevent biofilm recolonization within 48 h.
The authors thank São Paulo State Research Supporting Foundation (Fundação de Amparo a Pesquisa do Estado de São Paulo) for the scholarships awarded to YWC and MMB (processes 12/07436-6 and 12/21011-8).
- Gomes PN, da Silva WJ, Pousa CC, Narvaes EA, Del Bel Cury AA: Bioactivity and cellular structure of Candida albicans and Candida glabrata biofilms grown in the presence of fluconazole. Arch Oral Biol. 2011, 56: 1274-1281.View ArticlePubMedGoogle Scholar
- Salerno C, Pascale M, Contaldo M, Esposito V, Busciolano M, Milillo L, Guida A, Petruzzi M, Serpico R: Candida-associated denture stomatitis. Med Oral Patol Oral Cir Bucal. 2011, 16: e139-143.View ArticlePubMedGoogle Scholar
- Williams D, Lewis MAO: Pathogenesis and treatment of oral candidosis. Journal of Oral Microbiology. 2011, 3: 5771-5782.View ArticleGoogle Scholar
- Ellepola AN, Samaranayake LP: Oral candidal infections and antimycotics. Crit Rev Oral Biol Med. 2000, 11: 172-198.View ArticlePubMedGoogle Scholar
- Paranhos HF, Silva-Lovato CH, Souza RF, Cruz PC, Freitas KM, Peracini A: Effects of mechanical and chemical methods on denture biofilm accumulation. J Oral Rehabil. 2007, 34: 606-612.View ArticlePubMedGoogle Scholar
- de Souza RF: de Freitas Oliveira Paranhos H, Lovato da Silva CH, Abu-Naba'a L, Fedorowicz Z, Gurgan CA. Interventions for cleaning dentures in adults. Cochrane Database Syst Rev. 2009, 7: CD007395Google Scholar
- Vieira AP, Senna PM, Silva WJ, Del Bel Cury AA: Long-term efficacy of denture cleansers in preventing Candida spp. biofilm recolonization on liner surface. Braz Oral Res. 2010, 24: 342-348.View ArticlePubMedGoogle Scholar
- Dhamande MM, Pakhan AJ, Thombare RU, Ghodpage SL: Evaluation of efficacy of commercial denture cleansing agents to reduce the fungal biofilm activity from heat polymerized denture acrylic resin: An in vitro study. Contemp Clin Dent. 2012, 3: 168-172.View ArticlePubMedPubMed CentralGoogle Scholar
- de Freitas Fernandes FS, Pereira-Cenci T, da Silva WJ, Filho AP, Straioto FG, Del Bel Cury AA: Efficacy of denture cleansers on Candida spp. biofilm formed on polyamide and polymethyl methacrylate resins. J Prosthet Dent. 2011, 105: 51-58.View ArticlePubMedGoogle Scholar
- da Silva PM, Acosta EJ, Pinto Lde R, Graeff M, Spolidorio DM, Almeida RS, Porto VC: Microscopical analysis of Candida albicans biofilms on heat-polymerised acrylic resin after chlorhexidine gluconate and sodium hypochlorite treatments. Mycoses. 2011, 54: e712-717.View ArticlePubMedGoogle Scholar
- de Andrade IM, Cruz PC, da Silva CH, de Souza RF, Paranhos Hde F, Candido RC, Marin JM, de Souza-Gugelmin MC: Effervescent tablets and ultrasonic devices against Candida and mutans streptococci in denture biofilm. Gerodontology. 2011, 28: 264-270.View ArticlePubMedGoogle Scholar
- Sousa FA, Paradella TC, Koga-Ito CY, Jorge AO: Effect of sodium bicarbonate on Candida albicans adherence to thermally activated acrylic resin. Braz Oral Res. 2009, 23: 381-385.View ArticlePubMedGoogle Scholar
- Desrosiers M, Myntti M, James G: Methods for removing bacterial biofilms: in vitro study using clinical chronic rhinosinusitis specimens. Am J Rhinol. 2007, 21: 527-532.View ArticlePubMedGoogle Scholar
- Ntrouka VI, Slot DE, Louropoulou A, Van der Weijden F: The effect of chemotherapeutic agents on contaminated titanium surfaces: a systematic review. Clin Oral Implants Res. 2011, 22: 681-690.View ArticlePubMedGoogle Scholar
- Valentine R, Jervis-Bardy J, Psaltis A, Tan LW, Wormald PJ: Efficacy of using a hydrodebrider and of citric acid/zwitterionic surfactant on a Staphylococcus aureus bacterial biofilm in the sheep model of rhinosinusitis. Am J Rhinol Allergy. 2011, 25: 323-326.View ArticlePubMedGoogle Scholar
- Ntrouka V, Hoogenkamp M, Zaura E, van der Weijden F: The effect of chemotherapeutic agents on titanium-adherent biofilms. Clin Oral Implants Res. 2011, 22: 1227-1234.View ArticlePubMedGoogle Scholar
- Felipucci DN, Davi LR, Paranhos HF, Bezzon OL, Silva RF, Pagnano VO: Effect of different cleansers on the surface of removable partial denture. Braz Dent J. 2011, 22: 392-397.PubMedGoogle Scholar
- Davi LR, Felipucci DN, de Souza RF, Bezzon OL, Lovato-Silva CH, Pagnano VO, Paranhos HF: Effect of denture cleansers on metal ion release and surface roughness of denture base materials. Braz Dent J. 2012, 23: 387-393.View ArticlePubMedGoogle Scholar
- Durkan R, Ayaz EA, Bagis B, Gurbuz A, Ozturk N, Korkmaz FM: Comparative effects of denture cleansers on physical properties of polyamide and polymethyl methacrylate base polymers. Dent Mater J. 2013, 32: 367-375.View ArticlePubMedGoogle Scholar
- Polyzois G, Niarchou A, Ntala P, Pantopoulos A, Frangou M: The effect of immersion cleansers on gloss, colour and sorption of acetal denture base material. Gerodontology. 2013, 30: 150-156.View ArticlePubMedGoogle Scholar
- Senna PM, Vieira AP, Sotto-Maior BS, Silva WS, Del Bel Cury AA: Influence of immersion time of denture cleansers on the surface roughness of resilient denture liners. Rev Odonto Cienc. 2011, 26: 35-39.View ArticleGoogle Scholar
- Moura JS, da Silva WJ, Pereira T, Del Bel Cury AA, Rodrigues Garcia RC: Influence of acrylic resin polymerization methods and saliva on the adherence of four Candida species. J Prosthet Dent. 2006, 96: 205-211.View ArticlePubMedGoogle Scholar
- Senna PM, Da Silva WJ, Faot F, Del Bel Cury AA: Microwave disinfection: cumulative effect of different power levels on physical properties of denture base resins. J Prosthodont. 2011, 20: 606-612.View ArticlePubMedGoogle Scholar
- Seneviratne CJ, Silva WJ, Jin LJ, Samaranayake YH, Samaranayake LP: Architectural analysis, viability assessment and growth kinetics of Candida albicans and Candida glabrata biofilms. Arch Oral Biol. 2009, 54: 1052-1060.View ArticlePubMedGoogle Scholar
- da Silva WJ, Seneviratne J, Samaranayake LP, Del Bel Cury AA: Bioactivity and architecture of Candida albicans biofilms developed on poly(methyl methacrylate) resin surface. J Biomed Mater Res B Appl Biomater. 2010, 94: 149-156.PubMedGoogle Scholar
- Mouhyi J, Sennerby L, Pireaux JJ, Dourov N, Nammour S, Van Reck J: An XPS and SEM evaluation of six chemical and physical techniques for cleaning of contaminated titanium implants. Clin Oral Implants Res. 1998, 9: 185-194.View ArticlePubMedGoogle Scholar
- Nikawa H, Hamada T, Yamashiro H, Kumagai H: A review of in vitro and in vivo methods to evaluate the efficacy of denture cleansers. Int J Prosthodont. 1999, 12: 153-159.PubMedGoogle Scholar
- The pre-publication history for this paper can be accessed here:http://0-www.biomedcentral.com.brum.beds.ac.uk/1472-6831/14/77/prepub
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.